How to resolve error 6A80 on an MP990 in canon printer

Error 6A80

There are several reasons for error 6A80 to appear. This article provides you recommendations with links to clear the message.

To clear the error, click on the link to open the article and get detailed instructions.

Paper is jammed or there is an object inside the printer.

The printer needs to be reset.

If the above recommendations do not help you resolve the error, the 

Call Canon Help Center +1-800-577-1869

Error 6000 or P03 on Canon printers

That is a line feed error. It also should be flashing 3 times for this error on the on/off button.

Solution 1:

• Verify that the paper tray is correctly set.
• If any object is placed in front of the machine, remove it.

Solution 2:

• Search for any small pieces of paper in the printer, or a tiny object.

Solution 3:

• Power off the printer
• Wait 30 seconds
• Power on.

Solution 4: one of these parts could be faulty:

• Timing sensor unit QM2-2683
• Timing slit disk film QC1-6229
• Feed roller ass'y QL2-0925
• Platten unit QM2-2923
• Logic board ass'y QM2-3078
• Paper feed motor QK1-1502

Post a Question....

How to fix error 6C10 on Canon Printers

This error appears on these printers: MP110, MP540, MP630, MP620, MP640, IP3600... and others...
Solution 1:

• Move the printhead to the center.
• Disconnect the printer and check on the right: is the purge unit ok ? No peace of paper ?

Solution 2:

• Do a reset of the printer:
• Power on
• Hold down the "Resume" button (triangle in a circle)  for 15 to 20 seconds.

Solution 3:

• Power off the printer.
• Open the door.
• Power on.
• When the cartridge is in the center, close the door.

Solution 4:

• Open the lid and allow the ink cartridge carrier to center itself. 
• Looking to the right, you will see a row of white rollers behind the carrier. 
• At the end of the rollers there is a small, clear piece of plastic that sticks up. Take a small piece of a paper towel and wipe all of the ink off this piece of plastic. When that is clean move on to the ink pad.
• About 1 inch, towards the front of the printer from that piece of plastic, is a small square, about 1/2 inch per side, that is a small foam pad. This is where the excess ink is collected. 
• Take a piece of paper towel and press into the foam. Do this until the paper towel is no longer collecting ink. Close the lid, turn off the printer then turn it back on.

·         Post a Question....

How to Install canon downloaded drivers in Mac

Installing Downloaded Drivers

Visit Canon's Support & Drivers page .

From the Support & Drivers page, select your model in the following manner:

Select your Product Type (Printers & Multifunction, Scanners, Copiers & Fax, etc.).

Select your Product Family (PIXMA MX Series, CanoScan Series, Personal Copiers, etc).

Scroll down the list until you reach your model, and then click 'Drivers & Software.'

Select the appropriate Operating System in the Select Operating System drop-down list.

Note: Some links may launch in a new window. If you are having troubling viewing, please disable any active pop-up.

Select the version of the operating system from the Select OS Version drop-down list.

Click Drivers to expand the view.

In Drivers section click the description of the desired driver.

Click 'I Agree - Begin Download' to agree to the Disclaimer and continue the download process.

Note: Please read and follow any on -screen instructions throughout this process. Some products may have a separate file that includes detailed installation instructions. Other products may include installation instructions on the screen or have a link in the 'Setup' section of the page where you click 'I Agree - Begin Download'. The instructions may vary and should be referenced prior to the download.
The download will start automatically. If the following or similar message appears during the download, click 'Continue'.

Running the Downloaded file:

When the download has completed, a window showing the contents of the download will open.



Double-click the Setup icon or Package file (.pkg or .mpkg) to start the install. Follow any on-screen instructions that follow

If installation did not begin automatically:

Windows:

Download the file again and retry.

Some models create a folder in the download location. If so, open the folder, then double-click the Setup.exe file.(for multifunction printers this file is in the DrvSetup subfolder )

Double-click the disk icon that is created on the desktop after the file is downloaded from the website.

A window similar to the example in step 8 will open.

Double-click the the Setup icon or the .pkg or .mpkg file to start the Mac installation (iP2000 is used as an example below).

Follow any instructions that appear. See More ( )

Call us +1-855-517-2433 (Toll Free)

Error Code 6502 on Canon printer

Error Code 6502 appears generally after changing a cartridge.

Solution 1:

• Unplug the printer.
• Remove the faulty Cartridge
• Plug in the printer and press and hold power button
• Keep it held down. Press Resume twice, and this should reset the fault.

Solution 2:

• The last cartridge installed may be faulty.
• Install a new cartridge

Read More...

Call Us +1-855-517-2433 (Toll Free)

Remove foreign objects from rear tray - MG5120

Check for Obstructions in the rear tray

If paper does not reach the Paper Edge Sensor, the LCD will show [Rear tray.

There is no paper. Load paper and press OK].

Power off the printer.

Remove paper from the Rear Tray.

Look in the Rear Tray area for an obstruction. If there is any foreign material (such as a piece of metal or pen) inside the printer, after turning the printer off and removing the power cord from the outlet, remove the foreign material by hand, or with tweezers.

Open the scanning unit (printer cover) and confirm that there is no foreign material in the printer. If there is any foreign material, remove it.

Note:
Avoid touching inner parts.

Close the scanning unit (printer cover).

Note:
When closing the scanning unit (printer cover), be careful not to jam your finger.

Power on the printer and confirm that the printer operates normally. See More ( )

Request for service

CALL US +1-855-517-2433  (TOLL FREE)

Printers - Canon BX Fuser Measurements

if you measure values in the indicated range on the right hand side of the fuser, the lamp is fine (240V fusers will read 3-4 times higher on the right hand side

Models
HP LaserJet 4V/4MV (Check uur cross reference guide below for other brands)
Removal Instructions
Open the front of the printer. Pop out the charge transfer roller, being careful not to touch the surface of the roller. Handle it at the metal ends only. Remove the 5 big brass screws holding the fuser in. There is a screw at each lower end of the fuser. At the top of the fuser, you'll see 5 screws. Remove the 2 outboard and the center screws. While pulling out on the plastic side to clear the metal shaft, lift one end of the fuser up, repeating for the other end.


If you don't have a meter, continuity can also be checked across the contacts on the right hand side of the fuser by using a digital tester.

Cross Reference Guide: Canon BX Printers


Acorn Graphtex 400
Apple LaserWriter Select 350
Birmy Graphics Powerimage 11/17, XL 11/17
Brother HL-8PSJ/HP-PSJ
Calcomp CCL600/XF
Canon BX
Canon LBP-BX
ECRM Scriptprinter
Genicom Corporation 9080
Daikin Industries Comtec 9700+
Intergraph Corp-8ppm
JBCC Power Writer 5036
JRL Systems Easycopy L Series/LP-180
Newgen Sys Turbo PS-440B/660B/1200B
OCE 6450/6451/6460
QMS 860 Hammerhead Print System
QMS 860/860 Plus Print System
Varityper 5160, Panther
Xante Accel-A-Writer 8100/8100 ENH
Xitron Clipper Cadet
Read More...

Any Kind of Canon Printer Problems Call Us
+1-855-517-2433 (Toll Free)