How to Reset Error Code E08 in Canon MP287 - Absorber Full

When the MP287is turned on, it will immediately appear on the LCD panel error E08 MP287. And when we do print command, then the monitor screen will show “The Ink Absorber is Almost Full”. Caption MP287 E08 error on the screen as follows:

1. Turn on the Canon MP287, MP287 LCD then the panel will pop up error E08, and there is a description of “The Ink Absorber is Almost Full” on the screen of your monitor.
2. Download Resetter MP287 at this link
3. Canon MP287 printer must be in a state of SERVICE MODE. Do I read the next step.
4. Canon MP287 Turn off the E08 error by pressing the power. Do not unplug the power cord.
5. Press and Hold the button STOP / RESET followed by pressing the POWER button. So both buttons depressed position.
6. Release the button STOP / RESET but do not release the button POWER.
   
   

Configure the printer driver to the correct port - MX712

In the following instructions, "XXX" signifies your machine's name.
Log on as a user account with administrator privilege.
Select items from the [ Start ] menu as shown below.

In Windows 7, select [ Devices and Printers ] from the [ Start ] menu.

In Windows Vista, select the [ Start ] menu > [ Control Panel ] > [ Hardware and Sound ] > [ Printers ].

In Windows XP, select the [ Start ] menu > [ Control Panel ] > [ Printers and Other Hardware ] > [ Printers and Faxes ].

Open the properties of printer driver for the machine.

In Windows 7, right-click the "Canon XXX Printer" icon (where "XXX" is your machine's name), then select [ Printer properties ].

In Windows Vista or Windows XP, right-click the "Canon XXX Printer" icon       (where "XXX" is your machine's name), then select [ Properties ].

Click the Ports tab to confirm the port settings.

Make sure that a port named "USBnnn" (where "n" is a number) with "Canon XXX Printer" appearing in the [ Printer ] column is selected for [ Print to the following port(s) ].

Call Canon Help Center +1-800-577-1869

Printers - Canon BX Fuser Measurements

if you measure values in the indicated range on the right hand side of the fuser, the lamp is fine (240V fusers will read 3-4 times higher on the right hand side

Models
HP LaserJet 4V/4MV (Check uur cross reference guide below for other brands)
Removal Instructions
Open the front of the printer. Pop out the charge transfer roller, being careful not to touch the surface of the roller. Handle it at the metal ends only. Remove the 5 big brass screws holding the fuser in. There is a screw at each lower end of the fuser. At the top of the fuser, you'll see 5 screws. Remove the 2 outboard and the center screws. While pulling out on the plastic side to clear the metal shaft, lift one end of the fuser up, repeating for the other end.


If you don't have a meter, continuity can also be checked across the contacts on the right hand side of the fuser by using a digital tester.

Cross Reference Guide: Canon BX Printers


Acorn Graphtex 400
Apple LaserWriter Select 350
Birmy Graphics Powerimage 11/17, XL 11/17
Brother HL-8PSJ/HP-PSJ
Calcomp CCL600/XF
Canon BX
Canon LBP-BX
ECRM Scriptprinter
Genicom Corporation 9080
Daikin Industries Comtec 9700+
Intergraph Corp-8ppm
JBCC Power Writer 5036
JRL Systems Easycopy L Series/LP-180
Newgen Sys Turbo PS-440B/660B/1200B
OCE 6450/6451/6460
QMS 860 Hammerhead Print System
QMS 860/860 Plus Print System
Varityper 5160, Panther
Xante Accel-A-Writer 8100/8100 ENH
Xitron Clipper Cadet
Read More...

Any Kind of Canon Printer Problems Call Us
+1-855-517-2433 (Toll Free)

How to Install Canon Printers Without the Disks

canon printers are more commonly used for personal computers, as opposed to commercial use. These particular printers usually come with installation disks that are used to install the hardware's software drivers on the computer, but it's easy to misplace those disks over time. Luckily, the Canon support site provides software drivers for Canon printers, allowing users to install the software without the disks.



1 .Go to the official Canon Global website in your computer's Internet browser.
2 . Click the "Support <Drivers/Downloads>" tab along the left side of the Canon Global homepage. Select your region on the interactive map that appears on the right side of the tab options, and select the subregion where you are located.
3 . Select your product type, and click "Printers & Multifunction" to begin searching for your Canon product type. Click the product series that relates to your Canon printer.
4 . Scroll through the list of Canon printer models in the product series. Click the "Drivers & Software" link next to your Canon printer's thumbnail image. You will be redirected to the printer's product and overview page.
5 . Scroll down the Canon printer's product and overview page to the Drivers and Downloads section of the page. Click the "Select Your Operating System" drop-down bar. Select the name of your operating system, and click the red arrow to retrieve the software driver for your system.
6 . Click the .exe link under the firmware files that will be listed for the Canon "Software & Drivers" section.
7 . Run the Canon printer driver's .exe file from the File Download box that will appear. Click "Open" once the driver is processed. This file download will open the Canon installation wizard.
8 .Follow the system prompts in the Canon installation wizard to connect your Canon printer and complete the installation process. 
Read More...

Any Kind of Canon Printer Problems Call Us
+1-855-517-2433 (Toll Free)

Delete Queued Print Job in Windows XP / Windows 2000 in Canon

If a print job is corrupt and does not print clearly, does not print at all or is preventing other queued jobs from printing, delete the queued job.

To perform this task, follow this procedure:

 1. On the Windows taskbar, double-click the printer icon located to the left of the time.
2. At the Printer window, select the print job, under 'Document Name' column, to highlight it.
3. From the 'Document' menu, select 'Cancel'.
4. Repeat steps two and three to cancel another print job.
If the printer icon is not located in the Windows taskbar, follow this procedure:
1. Open the Printers Folder
2. Double-click the printer icon to open the print queue window
3. Click 'Printer'.
4. Click "Cancel All Documents'


  1.Turn off the printer.
2. When the printer operations stop completely, try to click 'Cancel All Documents'.
If the print job cannot be cancelled or will not stop printing, please follow these steps:
1. Close the Printer window.
2. Shut down the computer.
3. Disconnect the printer cable (USB or parallel cable).
4. Restart the computer.
5. If a message window appears asking to cancel printing, select 'Yes'.
6. After all print jobs have been cancelled, reconnect the cable to the printer and then try to print again.

Read More...

Any Kind of Canon Printer Problems Call Us
+1-855-517-2433 (Toll Free)

Wireless Printing Access in canon printer

Wireless Printing Access

Printing with Windows:
To print wirelessly internet access must be granted
from the OSU_PUB router. These instructions are for
printing with Canon Copier P9100. Here are the
steps of how to print wirelessly.
1. Click “Start”, and go to Printers and Faxes, this is in
Control Panel.
2. Click “Add Printer”. A dialog box will now appear.
Click “Next”.
3. At the next screen, make sure you uncheck the
"Automatica!y detect and insta! my Plug and Play
printer" checkbox, and go ahead and hit "Next".
4. The next screen will ask you for what port you
want, select the "Create New Port" radio button.
5. Now choose "Standard TCP/IP Port".
6. Now go ahead and hit "Next". Another dialog box
will come up, go ahead and hit "Next".
7. The next screen will ask you for IP address or
printer name. Enter the follow IP:
"128.193.195.69" (without quotes) into the IPAddress. The Port Name should automatically be

Read More...

Any Kind of Canon Printer Problems Call Us
+1-855-517-2433 (Toll Free)

Wireless internet access for Mac: in canon printer

Wireless internet access for Mac:

OSU gives internet access to authorized people through a submission of what is called a

“MAC address.” Here are the steps of how to find the MAC address on Macintosh.

1. Open System

preferences in the

applications menu.

2. Click 0n the

“Network” icon.

3. Select “Airport.” In the “Network

Name” dialog box select

OSU_PUB. Then click

“Advanced.”

4. In the “Airport” tab, make sure “OSU_PUB” is

selected.

5. Look down at the bottom where it says, “AirPort

ID”, this is your MAC address.

6. Write down this address. Now simply email this

address to either Tim Maddux:

. They will submit

this address to OSU IT support services. Granting

access takes one to two days.

Read More...

Any Kind of Canon Printer Problems Call Us
+1-855-517-2433 (Toll Free)

how to Ideal for sharing Canon Multi-Function and USB printers

Features and benefits

Convert your Canon MFP and printers to a shared network resource
With the C-6700WG, you can remotely share a Canon USB MFP/printer over the
network while at home with your familiy members or at the office with co-workers.

Network printing, scanning, memory card sharing and PC fax.

The C-6700WG provides easy wireless network access with full funcionalities of the
compatible Canon device.

Real-time Canon printer status monitoring support

The convenience of the Canon status monitoring function is available on the
network as if it was locally connected to your PC. You can remotely monitor various
defined printer operating conditions such as ink levels and paper empty on a realtime
basis.

Easy wireless configuration with Microsoft Windows Connect Now*

The C-6700WG supports Microsoft Windows Connect Now. It simplifies the

complicated wireless network initial configuration. The process is very easy. Use the

Windows XP Connect Now wizard, save the results on your USB flash thumb drive,

and then insert the thumb drive to the C-6700WG. It automatically creates the

wireless configuration instantly. Alternatively, the C-6700WG can be configured over
a wired LAN connection.

Read More...

Any Kind of Canon Printer Problems Call Us
+1-855-517-2433 (Toll Free)

What to do if special driver options are causing the problem?

What to do if special driver options are causing the problem?

One could simply say, that if a user doesn’t use the driver options which causes problems with GDI accounting, everything works fine. But of course a user wouldn’t know which driver options to avoid nor would it be right to expect such behaviour.
For certain Canon printer drivers the Canon Driver Configuration Tool (CDCT) offers a solution. With this CDCT it is possible to configure certain Canon printer drivers'
default values, masking functionality and creating a configured driver set. It can be used for Canon printer drivers functioning under MS Windows.
The CDCT will create INF-based driver set installations that can be installed with the Add Printer or the Point and Print feature. Via this tool it is possible to disable or hide those functions which would cause the accounting to fail.
For various printer drivers that are known to cause problems with GDI accounting, NT-ware has checked which functionality is the cause of this. A detailed list of checked functionalities can be found in the NT-ware Compatibility List. Please refer to this document for an exact overview of which functionality per tested printer driver to disable with the CDCT to configure the printer driver for right GDI accounting.
The CDCT can be used to configure the following base drivers:
• Canon UFR II Printer Driver Version 1.30 or later
• Canon PCL5e/5c Printer Driver Version 6.70 or later
• Canon PCL6 Printer Driver Version 4.70 or later
• Canon PS3 Emulation Printer Driver Version 2.60 or later
Note: There is unfortunately no CDCT for Canon GARO or CAPT drivers. So please be aware of the problems which could occur. NT-ware recommends to only use a tested driver to prevent those problems.
The "Systems & Technical Support Department" within each NSO will have a nominated person who has access to all processes and requirements relating to CDCT. Please refer to this department within your NSO for more information concerning the CDCT.
Note: Any support for configured drivers is handled by the appropriate NSO of Canon. NT-ware won’t give support for configured drivers but will help you by testing printer drivers that are causing problems and providing information as to how to overcome these problems.

Read More...

Any Kind of Canon Printer Problems Call Us
+1-855-517-2433 (Toll Free)

Enable the EMF spooling behaviour of the Canon printer driver

For some Canon printer drivers it is necessary to "manually" enable EMF spooling in the driver settings to make GDI accounting possible (i.e. UFR II, CAPT, PCL5/6 and PS3 drivers). It is possible that some drivers don’t need to be prepared for GDI accounting like for example most GARO drivers.
In the following you’ll get a short description about where you have to set up the EMF spooling at the Canon printer driver.
Note: The following example shows how EMF spooling is enabled on an iR2270/iR2870. The settings and menus may vary for different printer types but principally they are nearly identical.
• Open “Printers and Faxes” and right click on the according printer.
• Select “Properties” to open the property dialog.
• You have to enable the EMF spooling on two locations. The first one you reach via the General tab, the second setting has to be configured via the Advanced tab. For the General tab you use the Printing Preferences… button, for the tab Advanced you use the Printing Defaults… button.


• The following screenshots and procedures are the same for both settings.
• Click on Printing Preferences in the General tab and go to the tab Finishing in the next window.
• Then click on Finishing Details.
• Make sure that EMF Spooling is enabled.
• Confirm with OK and close all other open driver windows via the OK buttons.
• Now proceed the same way via the Advanced tab in the printer properties like described above. In the Advanced tab, click on Printing Defaults… to open the printing preferences.
• The EMF Spooling should be turned on now on both locations. Now, your printer should be rightly prepared for GDI accounting. But if you still encounter problems, these can be caused by the use of special

Read More...

Any Kind of Canon Printer Problems Call Us
+1-855-517-2433 (Toll Free)

how to Check your Settings canon

If you enable GDI Accounting in uniFLOW OM for the appropriate printer, uniFLOW OM automatically sets the printer processor of the printer to “ApjPrint – NT EMF 1.008” . Prerequisite for this mechanism is that EMF spooling at the Canon printer driver is enabled.

You can check if the printer processor is set in the right way if you open the properties of the printer and go to the “Advanced” tab as shown below:

Then click on “Print Processor…” and check if it is set to “ApjPrint – NT EMF 1.008” as in the following screenshot

If the Print Processor is set to RAW you'll be having problems with GDI accounting.

How you can solve or circumvent these problems is described below.

Read More...

Any Kind of Canon Printer Problems Call Us
+1-855-517-2433 (Toll Free)

Problems with GDI Accounting and Canon printer drivers

If you have configured the printer in uniFLOW OM correctly with the GDI accounting method, normally uniFLOW OM automatically sets the printer processor of the printer to "ApjPrint – NT EMF 1.008". Prerequisite for this automatism to run fluently is that EMF spooling at the Canon Printer driver is enabled. If this is the case, the print job data will be EMF, which allows uniFLOW OM to process these data as meta files, which is what GDI accounting is all about.

Unfortunately some Canon drivers are causing problems here, because they block this uniFLOW OM functionality and disable the EMF spooling by resetting the datatype to RAW.

How do you know, whether the driver you are using is having problems with GDI Accounting? Well, first of all, you'll of course notice that your accounting data are not correct. To see, whether GDI is the culprit of your problems, you can check your data stream and settings in the following way.

Read More...

Any Kind of Canon Printer Problems Call Us
+1-855-517-2433 (Toll Free)

how to should I use GDI accounting in canon printer

uniFLOW OM version 2.2 support accounting based on GDI (Graphical Device Interface). The advantage of accounting based on GDI is that it is largely driver independent, so in many cases you don’t need to worry if a driver or printer language is supported. An additional advantage is that print jobs can be easily routed between devices with different printer drivers. Disadvantage of GDI accounting is that it does not give the complete level of detail, it detects however, most of the important attributes of print jobs: number of pages, number of copies, page format, page size, simplex/duplex, colour / black & white. So the choice for GDI compared to other accounting methods should always be the result of careful consideration.

Some Canon drivers appear to cause problems when GDI Accounting is used. After elaborate testing on our side we have come to the conclusion that various printer driver options, especially finishing options, in some Canon drivers will cause GDI accounting to fail. Because it differs from driver to driver exactly which special finishing options are responsible for this behaviour, you should refer to our Compatibility List for an in-dept analysis of several printer driver families.

For more information and a detailed description of how to use GDI Accounting in uniFLOW OM, please refer to the uniFLOW OM User Manual.

Please note, that GDI accounting is not that detailed as PS, PCL or CPCA accounting. So please only use GDI accounting in those cases, in which a normal accounting is not possible or fails, for example with CAPT, GARO or UFR II drivers.

Read More...

Any Kind of Canon Printer Problems Call Us
+1-855-517-2433 (Toll Free)