Reset the printer to resolve error conditions or if the printer does not respond

Resetting the Printer

By resetting the printer's power, the print buffer is cleared and certain sensors are reset. If there is invalid data in the buffer, or sensors are stuck in a particular mode; a message may appear.

Follow these steps to reset the printer:

Turn the printer off with the Power button (if available).

Disconnect the data cable from the printer (not applicable to WiFi, Bluetooth or Infrared) .

Unplug the printer's power cord for approximately 10 minutes, and then plug it back in. If troubleshooting a communication issue, reconnect the data cable (not applicable to WiFi, Bluetooth or Infrared).

Turn the printer back on.

Note: If resetting the printer does not work, please attempt any other solutions that appeared in your search results. If this is a hardware message on the printer, the printer may need to be repaired. See More ( )

Request for service

CALL US +1-855-517-2433  (TOLL FREE)

How To Service My Printer - Error Code for Canon PIXMA MP287

P02 – Carriage Error, there is something wrong with your printer ink cartridge, it could be in wrong position, something blocked the chip (see at the back of cartridge), also P02 error code show sign that your print head is broken or faulty, try to take out both of the cartridge and then put it back.

Read More...

P07 – Ink Absorber Is Full or Almost Full, you need to reset your printer, here is an article how to reset your canon mp287 printer. Follow the step, you can reset only if your absorber is almost full. You can’t reset if your ink absorber is full, to fix the absorber is full, you need to disassemble your printer and then replace the ink absorber (it’s just a pieces of sponge located in the printer), last time I just deep the sponge into water until the sponge is clean. I found a video but for MP258, the sponge located at the same position.

Read More...

Any Kind of Canon Printer Problems Call Us
+1-855-517-2433 (Toll Free)

How to Reset Error Code E08 in Canon MP287 - Absorber Full

When the MP287 is turned on, it will immediately appear on the LCD panel error E08 MP287. And when we do print command, then the monitor screen will show “The Ink Absorber is Almost Full”. Caption MP287 E08 error on the screen as follows:

1. Turn on the Canon MP287, MP287 LCD then the panel will pop up error E08, and there is a description of “The Ink Absorber is Almost Full” on the screen of your monitor.
2. Download Resetter MP287 at this link
3. Canon MP287 printer must be in a state of SERVICE MODE. Do I read the next step.
4. Canon MP287 Turn off the E08 error by pressing the power. Do not unplug the power cord.
5. Press and Hold the button STOP / RESET followed by pressing the POWER button. So both buttons depressed position.
6. Release the button STOP / RESET but do not release the button POWER.
7. In these circumstances the POWER button is still depressed, press the STOP / RESET 6 times.
8. Then release both buttons simultaneously. Then the Canon MP287 will be in Service Mode condition.
9. LCD Panel MP287 will blank / dark and in your computer will detect new hardware. Ignore it.
10. The next step Exctract and Run Service Tool for MP287 MP287 E08 error you downloaded earlier.
11. Click the “PLAY”, then the printer will proceed, then MP258 will print one page with the words “D = 000.0″
12. Click “Clear EEPROM”.

13. Then click “EEPROM”, and the printer will print the results MP258 Resetter. Writing one line as follows: “TPage (COPY TTL = 00 000 = 00 000)”.
14. Canon MP287 Turn off by pressing the power.
15. Canon MP287 printer that error E08 will be normal again.

Read More...

Any Kind of Canon Printer Problems Call Us
+1-855-517-2433 (Toll Free)

Easy-WebPrint is unavailable with Internet Explorer 7.0. in Canon Printer

Internet Explorer 7.0 includes many of the same printer functions as Easy-WebPrint. Therefore, Easy-WebPrint cannot be installed on a computer with Internet Explorer 7.0 installed. Also, after upgrading IE6.0 to IE7.0 on a PC with the latest Easy-WebPrint installed, Easy-WebPrint will not be available and an error message dialog will be displayed upon starting IE7.0 .

When upgrading IE6.0 to IE7.0 in the PC with the latest Easy-WebPrint already installed :
When IE7.0 is launched, the following message dialog is displayed, and Easy-WebPrint is not available. In such a case, click OK to close the dialog.
When installing Easy-WebPrint on the PC with IE7.0 already installed :


At the Easy-WebPrint installation, as the following message dialog is displayed, Easy-WebPrint cannot be installed. In such a case, click OK to close the dialog.


When any of the following phenomena occurs, confirm the version of Internet Explorer.
· Easy-WebPrint cannot be installed.
· Printing from Easy-WebPrint cannot be performed.
· The Easy-WebPrint toolbar is not displayed.


Internet Explorer 7.0 has similar functions that users of Easy-WebPrint have appreciated :
Print(print with a full image)
High Speed Print


Duplex

See the following instructions to find out how to perform these useful functions.
(1) --- Print (printing with a full image)
(2) --- High Speed Print
(3) --- Duplex


1. How to perform printing with a full image
Internet Explorer 7.0 enables web page printing with a full image.
Click 'Print' from the File menu, or click the printer icon on the tool bar; printing will start.

When clicking Print from the File menu :

* The above image shows the beta version of Internet Explorer 7.0.
When clicking the printer icon :


2. How to perform High Speed Print

To perform High Speed Print, select 'Fast' in Print Quality in the printer driver.

a. Click 'Preferences' in the Print window to open the Printing Preferences window.

b. Select 'Fast' in Print Quality.

How to perform Duplex printing

To perform Duplex printing, specify duplex printing in the printer driver.

a. Click 'Preferences' in the Print window to open the Printing Preferences window.

b. Open 'Page Setup' and select 'Duplex Printing' before printing.

Read More...

Any Kind of Canon Printer Problems Call Us
+1-855-517-2433 (Toll Free)

Install the print head in canon Printer

Install the print head by following the procedure below.

1. Open the paper support and paper output slot cover of the printer.

 Paper Support

 Paper Output Slot Cover

Power the printer on.

Power Button


3. Open the print head cover. The print head holder moves to the center.

Print Head Cover

Print Head Holder


4. Pinch and lift the print head lock lever at the front of the print head holder.

Print Head Lock Lever

. 5. Remove the print head from its package and remove the orange protective cap that covers the bottom of the print head.

  Protective Cap
 
Print Head Face

Insert the print head into the print head holder so that the "^" mark faces the "V" mark.

Print Head Arrow

Ink Supply Filter

Lower and close the print head lock lever fully until you hear a click.

Print Head Lock Lever

Next, set the ink tanks.


6. Remove the black ink tank (BCI-15 Black) from its package. Hold the ink tank as shown in the illustration, and remove the orange protective cap, while lifting in the direction of the arrow.

Black Ink Tank (BCI-15 Black)

 Protective Cap

  Ink Outlet

Set the Black ink tank at an angle in the back so that the ">" mark on the ink tank faces the "<" mark on the print head lock lever.

Ink Tank and Print Head Lock Lever Marks


7. Press down on the <PUSH> mark on the ink tank until you hear a click.

<1> <PUSH> Mark

Read More...

Any Kind of Canon Printer Problems Call Us
+1-855-517-2433 (Toll Free)

Delete Queued Print Job in Windows XP / Windows 2000 in Canon

If a print job is corrupt and does not print clearly, does not print at all or is preventing other queued jobs from printing, delete the queued job.

To perform this task, follow this procedure:

 1. On the Windows taskbar, double-click the printer icon located to the left of the time.
2. At the Printer window, select the print job, under 'Document Name' column, to highlight it.
3. From the 'Document' menu, select 'Cancel'.
4. Repeat steps two and three to cancel another print job.
If the printer icon is not located in the Windows taskbar, follow this procedure:
1. Open the Printers Folder
2. Double-click the printer icon to open the print queue window
3. Click 'Printer'.
4. Click "Cancel All Documents'


  1.Turn off the printer.
2. When the printer operations stop completely, try to click 'Cancel All Documents'.
If the print job cannot be cancelled or will not stop printing, please follow these steps:
1. Close the Printer window.
2. Shut down the computer.
3. Disconnect the printer cable (USB or parallel cable).
4. Restart the computer.
5. If a message window appears asking to cancel printing, select 'Yes'.
6. After all print jobs have been cancelled, reconnect the cable to the printer and then try to print again.

Read More...

Any Kind of Canon Printer Problems Call Us
+1-855-517-2433 (Toll Free)