How to resolve error 6A80 on an MP990 in canon printer

Error 6A80

There are several reasons for error 6A80 to appear. This article provides you recommendations with links to clear the message.

To clear the error, click on the link to open the article and get detailed instructions.

Paper is jammed or there is an object inside the printer.

The printer needs to be reset.

If the above recommendations do not help you resolve the error, the 

Call Canon Help Center +1-800-577-1869

How to fix Error 6942 in Canon MX 370

Description:

USB sub-system timeout error

Resolution:

-> Power off the machine, and power it on again.

If the error still occurs, replace the part listed on the right (under “Parts to be replaced if the listed solutions are not effective”). 

Canon Pixma MX340 printer. How to clear Error 5200?

1. Turn off the printer .
2. Press the Stop button for 2 second and hold it.
3. Press the On button, hold it and release the Stop button.
4. Press Stop button 5 times then release together, with the On button.
5. LCD display will blank and now reseting.
6. Computer will detect new hardware just ignore it.
7. Turn off the printer then turn it On.

If the error persists, the unit may require servicing to resolve the issue.  Please click on the Contact Us link below to obtain further assistance and servicing options if needed.


This didn't answer your question or issue? Find more help at Contact Us.

How to Connect My Canon Printer to My Linksys Router

Linksys routers are devices that share computers and printers across a network. You can connect any machine to the router, including a Canon printer. Linksys routers have a service called a print server that allows you to connect printers and use them from any machine on the network. A print server assigns an IP address to the printer automatically, so every time you turn on the machine it receives an address and you can print from a desktop or laptop on your network

1.   Power on the Canon printer and connect it to the Linksys router. Open a web browser on a machine that is connected to the router. Type the IP address of the router into the address bar of the web browser. For a Linksys router, the default is 192.168.1.1. If you have a username and password set, then enter it int the window that appears. The default username for the Linksys router is "admin" with a blank password.

2. Click the button labeled "Set up Print Server" in the main configuration screen. This starts the process to configure the router for your Canon printer.

3. Click the "Next" button until you reach the screen that has a "Refresh" button on it. Click the "Refresh" button to obtain an IP address for the Canon printer. Click the "Next" button.

4. Select the option labeled "Automatically assign an IP address." This setting gives the printer an IP address each time it's started. Click the "Next" button.

5. Enter a user name and password for the Linksys print server settings. This restricts the printer to authorized users. Click the "Next" button.

6. Enter a user name and password for the router. If you want to keep the existing user name and password, then just click the "Next" button.

7. Click "Next" until you get to the "Test Print" page. Click the button labeled "Test Print" to send a page to the printer. This ensures that the Canon printer is working on the network.

 

note: If you are Facing More Problems Call Canon Help Center : 855-517-2433

How to solve error 6A90 or "APP sensor error" on Canon printers

Error code 6A90 or "APP sensorerror" occured during paper feeding or purging.

Solution 1:

• check for foreign material or paper debris around the purge drive system unit;
  - remove foreign material.

Solution 2:

• check for foreign material or paper debris around the ASF unit;
  - remove foreign material.

Solution 3:

• If other solution fail, replace one off the following part
• If you are Facing More Problems Call Canon Expert: 855-517-2433

How to Fix Error code U140 & U150 on canon printers

Solution 1:

• Open the paper output tray.

• Turn on the printer and open the scanning unit. The printer cartridge carriage will move to the center. Open the inner cover securing the cartridge in place by pulling it downward.

• Press the tab on the problematic ink cartridge and lift it to remove it from the printer. You will be able to tell which ink cartridge is causing the problem because its indicator light will be off or flashing.

• Open the replacement ink cartridge and pull the orange tape in the direction of the arrow to remove the protective film. Tear the orange tape off along the dotted line.
• Place the ink cartridges into the printer and press where indicated on the cartridge until it clicks into place. Ensure that all ink cartridges have a red indicator light showing that they are properly installed.

• Close the inner cover on the cartridge carriage and the scanning unit. The printer will automatically start a print head cleaning cycle. When the cleaning cycle is complete, the printer is ready to use.

Solution 2:

• Put the little green circuit board from the old ink cartridge of the same color in the new cartridge.
• If you are facing more problems Call Us +1-855-517-2433

How to start the installation manually (PIXMA Printers)

Starting the Installation Manually

If AutoRun is enabled, the installation starts automatically. If installation does not start automatically, or you are installing from the software copied on another drive, do the following:

Click Start then Computer.

In Windows XP, click Start then My Computer.

In Windows 2000, double-click the My Computer icon on the desktop.

Double-click the CD-ROM icon on the displayed window.

If the contents of the CD-ROM are displayed, double-click MSETUP4.EXE.

NOTE:

If the CD-ROM icon is not displayed, try the following:

Remove the CD-ROM from your computer, then insert it again.

Restart your computer.

If the icon is still not displayed, try different discs and see if they are displayed. If other discs are displayed, there is a problem with the Setup CD-ROM. In this case, contact the service center. See More ( )

Call us +1-855-517-2433 (Toll Free)

Printers - Canon BX Fuser Measurements

if you measure values in the indicated range on the right hand side of the fuser, the lamp is fine (240V fusers will read 3-4 times higher on the right hand side

Models
HP LaserJet 4V/4MV (Check uur cross reference guide below for other brands)
Removal Instructions
Open the front of the printer. Pop out the charge transfer roller, being careful not to touch the surface of the roller. Handle it at the metal ends only. Remove the 5 big brass screws holding the fuser in. There is a screw at each lower end of the fuser. At the top of the fuser, you'll see 5 screws. Remove the 2 outboard and the center screws. While pulling out on the plastic side to clear the metal shaft, lift one end of the fuser up, repeating for the other end.


If you don't have a meter, continuity can also be checked across the contacts on the right hand side of the fuser by using a digital tester.

Cross Reference Guide: Canon BX Printers


Acorn Graphtex 400
Apple LaserWriter Select 350
Birmy Graphics Powerimage 11/17, XL 11/17
Brother HL-8PSJ/HP-PSJ
Calcomp CCL600/XF
Canon BX
Canon LBP-BX
ECRM Scriptprinter
Genicom Corporation 9080
Daikin Industries Comtec 9700+
Intergraph Corp-8ppm
JBCC Power Writer 5036
JRL Systems Easycopy L Series/LP-180
Newgen Sys Turbo PS-440B/660B/1200B
OCE 6450/6451/6460
QMS 860 Hammerhead Print System
QMS 860/860 Plus Print System
Varityper 5160, Panther
Xante Accel-A-Writer 8100/8100 ENH
Xitron Clipper Cadet
Read More...

Any Kind of Canon Printer Problems Call Us
+1-855-517-2433 (Toll Free)

How to Install Canon Printers Without the Disks

canon printers are more commonly used for personal computers, as opposed to commercial use. These particular printers usually come with installation disks that are used to install the hardware's software drivers on the computer, but it's easy to misplace those disks over time. Luckily, the Canon support site provides software drivers for Canon printers, allowing users to install the software without the disks.



1 .Go to the official Canon Global website in your computer's Internet browser.
2 . Click the "Support <Drivers/Downloads>" tab along the left side of the Canon Global homepage. Select your region on the interactive map that appears on the right side of the tab options, and select the subregion where you are located.
3 . Select your product type, and click "Printers & Multifunction" to begin searching for your Canon product type. Click the product series that relates to your Canon printer.
4 . Scroll through the list of Canon printer models in the product series. Click the "Drivers & Software" link next to your Canon printer's thumbnail image. You will be redirected to the printer's product and overview page.
5 . Scroll down the Canon printer's product and overview page to the Drivers and Downloads section of the page. Click the "Select Your Operating System" drop-down bar. Select the name of your operating system, and click the red arrow to retrieve the software driver for your system.
6 . Click the .exe link under the firmware files that will be listed for the Canon "Software & Drivers" section.
7 . Run the Canon printer driver's .exe file from the File Download box that will appear. Click "Open" once the driver is processed. This file download will open the Canon installation wizard.
8 .Follow the system prompts in the Canon installation wizard to connect your Canon printer and complete the installation process. 
Read More...

Any Kind of Canon Printer Problems Call Us
+1-855-517-2433 (Toll Free)

How To Service My Printer - Error Code for Canon PIXMA MP287

P02 – Carriage Error, there is something wrong with your printer ink cartridge, it could be in wrong position, something blocked the chip (see at the back of cartridge), also P02 error code show sign that your print head is broken or faulty, try to take out both of the cartridge and then put it back.

Read More...

P07 – Ink Absorber Is Full or Almost Full, you need to reset your printer, here is an article how to reset your canon mp287 printer. Follow the step, you can reset only if your absorber is almost full. You can’t reset if your ink absorber is full, to fix the absorber is full, you need to disassemble your printer and then replace the ink absorber (it’s just a pieces of sponge located in the printer), last time I just deep the sponge into water until the sponge is clean. I found a video but for MP258, the sponge located at the same position.

Read More...

Any Kind of Canon Printer Problems Call Us
+1-855-517-2433 (Toll Free)