Wednesday 2 May 2012

Install the print head in canon Printer


Install the print head by following the procedure below.
1. Open the paper support and paper output slot cover of the printer.

 Paper Support

 Paper Output Slot Cover

Power the printer on.

Power Button


3. Open the print head cover. The print head holder moves to the center.

Print Head Cover

Print Head Holder


4. Pinch and lift the print head lock lever at the front of the print head holder.

Print Head Lock Lever

. 5. Remove the print head from its package and remove the orange protective cap that covers the bottom of the print head.

  Protective Cap
 
Print Head Face

Insert the print head into the print head holder so that the "^" mark faces the "V" mark.

Print Head Arrow

Ink Supply Filter

Lower and close the print head lock lever fully until you hear a click.

Print Head Lock Lever

Next, set the ink tanks.


6. Remove the black ink tank (BCI-15 Black) from its package. Hold the ink tank as shown in the illustration, and remove the orange protective cap, while lifting in the direction of the arrow.

Black Ink Tank (BCI-15 Black)

 Protective Cap

  Ink Outlet

Set the Black ink tank at an angle in the back so that the ">" mark on the ink tank faces the "<" mark on the print head lock lever.

Ink Tank and Print Head Lock Lever Marks


7. Press down on the <PUSH> mark on the ink tank until you hear a click.

<1> <PUSH> Mark



Any Kind of Canon Printer Problems Call Us
+1-855-517-2433 (Toll Free)

1 comment:

  1. Nice steps of Installing the print head in canon Printer,these steps help me to installing theprint head in cannon printer.Thanks for sharing this.

    Refurbish print head

    ReplyDelete